This might be of interest to those of you in ban states but don’t overlook it for those who don’t. It can be rescued!
It appears to have had the folding stock “Fixed” in place and the retention stud removed. The stock is also at a strange angle. The lower could be replaced (I know a guy who has a stripped Sterling lower 😉 and the only hang up would be if the latch plate on the butt stock is missing.
I will probably throw up a bid just to strip it for parts. Of course if I win I will probably try and fix it up as I am a sucker for strays that need a good home.
If you end up with it let me know if you need any parts, I can help with that.
Good friend of the site Oscar sent me an upper that another gunsmith attempted to remove the barrel on. He got it back from said gunsmith with the message that he was unable to remove the barrel and afterwords he was unable to tighten the barrel back up.
What many do not know is that the AR180B has a unique method of barrel retention and it is not at all obvious.
If we look at a bare trunion you will note that it has a large hole through the middle with a small step.
The barrel for this gun uses an AR15 barrel extension that is turned down and press fit into this trunion. That’s it! Nothing else. Just a press fit.
What happens then when the unsuspecting gun plumber puts a barrel wrench on the barrel and clamps that flat sided receiver in his vise? It makes funny noises and turns the extension in the trunion. Not good. Oscar mentioned that it shot terrible after he got it back and I suggested he send it to me for inspection. It didn’t take long to figure out my initial thoughts were correct.
Now how do I fix it so it is safe to shoot? I want to thank Oscar for being patient with me as I have had his upper for quite some time while I try to figure out what to do.
I settled on a shallow pin. I wanted it to not show unless you were looking for it and still be able to hold everything secure.
Sneaking the Tig torch in between the bosses was challenging but ended up with good penetration after I got the amperage dialed in.
So what is the right way to remove a barrel for the 180 Bravo? Use a modified reaction wrench. Do not put any twisting force on the receiver itself.
I now have everything needed to offer shorty conversions or to sell the parts outright if you want to roll your own. CNC machined from billet steel these new hand guard caps will retain the cut down hand guards on an AR180 or 180B. Shoot me a message through the contact form if you need more details.
I have reworked the model and done modifications to my printer and I am happy with how they are printing now.
I have also decided to put them up for sale and will print and fill orders as they come in. That might take awhile to fill as they take quite some time to print. 18+ hours to be exact.
These can certainly be used as is but really need to be sanded, polished, possibly even painted.
Here is an early prototype that I sanded and rounded the edges then polished.
First 3 will ship right away, first come, first served. Just click on the link at the top of the page to take you to the Shopping Cart.
I am really looking forward to getting some pictures of how your pistol grips turn out!
As always use the “Contact Me” link to send me an email if you have any questions.
