GunLab Visits the Old Pueblo and AR180S.Com gets Blog of the Month

I got a call yesterday that Chuck from GunLab would be traveling through Tucson and he wanted to stop by and meet.

We chatted for quite a while and I got to do a little show and tell so he cold take some pictures for the AR-180 section of his site.

He was passing through on a super secret gun buying mission the details of which I am not at liberty to discuss. But let me just say that his mission was a success and I got to fondle his new acquisition. I’m pretty sure I had a dream about shooting it last night. I hope that becomes a reality someday.

I had a blast talking guns last night and he and his wife are some of the nicest people I have ever met. It was a true pleasure to have them at my home. I also have an open invitation to visit the Lab and I will be heading up there soon.

Chuck also informed me that i received the honor of Blog of the Month at The Firearm Blog

I was shocked that Nathaniel had even found my little ol’ blog but could not be prouder.

Make sure to check out all the articles he has over there, I visit it often and I am always finding something interesting. It is a great site.

Please subscribe and comment with any suggestions on how I can improve my site. They should be up and running but just require approval beforehand to keep the spammers at bay.

Speaking of spam,since my email notices from this site have my personal email as a return many spam filters will immediately drop them in the spam folder. Please white list my site and they should start showing up in the inbox, where they belong.

 

Subscriber Pictures #1

Subscriber Tommy was kind enough to send me some pictures from the latest Armalite scope he recently picked up.

You can see it is is an early inverted post scope marked with the serial number 670221.

 

Tommy Armalite Scope-1

Tommy Armalite Scope-2

He also showed us the scope mount that was on his early Costa Mesa when he got it from his dad. It is unmarked just like the one I own. I don’t believe these had serials or any other markings.

Tommy Armalite Scope Mount

 

I also must apologize to subscriber Jeff as he sent me some pictures some time back and I never posted them.

He has a Costa Mesa gun with a very interesting feature, a bolt hold open that you can actuate from the outside of the gun with the magazine still in the gun.

DSC_0006_zpsbf349eb2

DSC_0007_zps0380b6b9

DSC_0015_zps4895256b

DSC_0016-2_zpse8bce40e

DSC_0018_zpsad8d50c1

 

It is unclear if this was done at the factory or after the fact by a gunsmith. It is a very professional job nonetheless.

If these guns were not so collectable I think it would be a very cool modification to perform as the only way to activate the bolt hold open is to reach in through the magazine well.

Here are a centerfold shot of Jeff’s Costa Mesa.

DSC_0011_zpsfab439dd

 

Thanks to Tommy and Jeff for their pictures and please contact me if you have any you would like to contribute.

 

First Generation AR-180 Scopes

The first generation AR-180 scopes are easy to identify if you know how.

They are marked in meters.

AR-180 Scope Meters

 

The reticle is of the inverted post style.

AR-180 Scope Inverted Post

The practical uses of this style reticle is mentioned in the manual.

AR-180 Scope Manual

To quote from the manual. “The sight incorporates an inverted post as well as fine cross-hairs. When “holding over” at extreme ranges, this precludes the post from blotting out the target.”

The final distinguishing mark that this scope features is a serial number on the bottom of the base. These will all start with 67 followed by four digits.

AR-180 Scope Serial 670037

My good friend and AR-180 mentor, Rich, has collected all the scope serial numbers he has come across over the years and has found none that are higher than 671000. He has further deduced that these were originally produced for the first 1000 Howa rifles.

Armalite never wanted to go into production and make guns as much as they wanted to design them and then license the rights to others to actually produce.

The fact that they had Howa Machinery produce the rifle is documented in the January 31, 1966 issue of U.S. News and World Report. One small paragraph under the heading “Rifles for Asia” reads.

“Armalite, Inc. the Costa Mesa, Calif., firm that took over the former Fairchild gun division, has developed a new combat rifle, the AR18. This model is to be produced by Japan’s Howa Machinery, Ltd., under a provisional agreement. It would be the first mass production of this rifle, with the Japanese expecting to export some units to such Southeast Asia customers as Thailand and the Philippines.”

Original article found here 

After Howa produced the first 1000 rifles but before they could ship, Japan became neutral and would not ship any guns to nations that were in active conflicts.

“Adopted in 1967, the three principles originally prohibited arms sales to Communist nations, countries under United Nations sanctions and countries in armed conflict, but it eventually grew into a blanket ban on all weapons exports.”

From NY Times article.

Early Howa AR-180’s are known to have been converted from AR-18’s so this is the series of events as I have come to understand them.

Howa produced 1000 AR-18 rifles in 1967. They were complete with serial numbered scopes and flash hiders. The Japanese government changed policy and they were not allowed to export them. The Costa Mesa plant was forced to ramp up production and in order to offer scopes as add on accessories, they imported the scopes from Howa as these were not under any sanctions. These scopes were offered up, in plain cardboard boxes, to any who ordered them with no thought given to matching the serial numbers.

AR-180 Scope Box

Picture found via Google Image Search

In conclusion, this makes for a pretty firm number of these early scopes not counting losses over the years. Less than 1000. Identifying and distinguishing them from the later scopes is pretty straight forward, marked in meters, inverted post reticle, and a serial number starting in 67.

Good hunting and please let me know if you have any pictures of original scope boxes you would like to share.

Please note I have manually added a few email addresses to my subscriber list, let me know if this is a problem and I will gladly remove them.

 

AR-180B Shorty Project Pt. III

The next part that had to made were the hand guards. I first mocked them up to find the approximate length then cut them off with my bandsaw. I left them a little long and figured I could trim them if I had to.

I then trimmed a small piece of the front end of the cut off part and fitted them into the hand guard. This will allow me to use the existing end cap.

AR-180S Inside Bottom Handguard AR-180S Inside Top Handguard

Here you can see that I didn’t get things exactly right as there is a small gap at the front of the hand guards. They will work for function testing but I intend to build a set of new end caps that encapsulate the entire hand guard.

AR-180S Left

Here she is ready to head to the range and dial in the gas port size.

Featuring a Stormwerkz mount and Primary Arms Micro Red Dot.

Stormwerkz.com

Primary Arms Micro

I would also like to ask if everyone could help me test out the site by leaving comments so I can see if it is working.