AR18 – Page 7 – AR180S.COM

July 12, 2015

Reader Letter: New Bolt Hold Open for Original AR-180’s

Reader Eric just sent me a message via the contact page and I have to say, it is something I have never considered before. I think it is a great idea. Here is the message he sent me;

From: Eric XXXX
Subject: Can we do a poll?

Message Body:
Hey guys, I was wondering if it was possible to put a poll up on the blog? Reason being, I’ve been communicating with Chuck at Gun Lab about making a bolt catch for original AR18/180’s modified to use mags with standard STANAG followers. I believe this will be a great opportunity for him plus provide us Armalite owners with a much-needed and way-overdue mod for our rifles. Simply put, no more “STANAG or Armalite” mags, just put a slit in a standard STANAG, PMAG or any of the dozens of other mags and it’ll function in the Armalite AND M16/M4/STANAG platform with a simple slit cut in the right-side mag body.
The poll would be simple…
“YES, I would buy this and maybe prepay”
“Yes, I like the idea but want to wait to see how it turns out (price, availability, quality)”
“No, I like being limited to overpriced, rare mags or modifying others to where they can’t be used in any other rifle”
Chuck might be on to one of the best mods to happen to the AR18/180 since it went to market. If we can put up a poll so he can see the interest, I’m sure he’ll move this up his “to do” list.
Thanks and thanks for the site and reviving the AR18/180 legacy!
~Eric, proud owner of a 1982 “widow-maker”

Please comment and let me know what you think of the idea.

May 29, 2015

New AR-180B Parts are Coming

Big shout out to Chuck over at GunLab.net who has started work on AR-180B parts. First up is the safety and he has worked out an awesome two piece design.

First some pics from Solidworks.

Here is a video of the safety lever being made.

And a couple pics of the actual part.

Yep, there will be a few available.

The plan is to offer a set of parts that will supplement your AR-15 lower parts kit and allow you to fully populate a Nodak NDS-18S. Previously the only way to do that was to buy a complete AR-180B Rifle and strip out the lower parts. This will allow you to buy a lower, AR-15 lower parts kit, and this lower kit and get a working lower for your AR-180B, AR-180, or Vulcan V18 upper.

May 27, 2015

What’s New at AR180S.com

Things have been busy around here and I think it will only get busier. Just the way I like it.

My new job has me out of town during the week but I love to travel and weekends with the family can’t be beat.

Next stop the San Francisco bay area then on to Oklahoma City and Amarillo TX.

The parts lot that I purchased is leading to a potential new project. (Don’t they always)

Thinking about building an AR-180B in .458 SOCOM. Why not, right.

I’m thinking a disapator with carbine length gas and full length handguards in a 16″ barrel.

Mods may have to be done to one of the guide rods and ejection port as the clearance may not be enough to clear the larger case.

Tony Rumore turned down a case head to fit the bolt and snapped this pic to show how little clearance there is.

I have a stripped Bravo upper and bolt carrier group, front sight bases and all the piston parts. Everything to build an upper but the barrel but how boreing would it be to build a stock one. First thought was .300 Blackout but then it struck me. Go Big or go home.

Maybe I can fit the 180C gas block under the hand guards and use a stripped 180B front sight base at the end of the barrel.

I’m going to be moving ahead with this project as funds and time allow. (As I get back to work I gain more of one and less of the other)

By the way I still have a few complete bolt carrier groups available for sale from the parts lot. Pick one up for your next project or as a spare. I don’t have to tell you how hard the bolts are getting to find.

Made up a new flash hider from an original print that I was given access to. (Sorry it’s not anything I can share or publish at this time)

You can see how it differs from the one that I reverse engineered from a picture. I do believe, however that the one I used as an example was not built to the same specs as the one that later made it into production

The new to me AAA SAP is begging to be made into an SBR and I am trying to find an original stock.

The rear of the reciever was cut off when it was made as a pistol so some type of adapter would have to be made.

I am also considering the left over Vulcan V18 stock as shown in the teaser pics from my last post.

I still have to get it to the range to test fire it before I even consider sending off for a stamp on this one.

As always I am watching my local craigslist to see if I can find a bigger lathe and possibly a small milling machine.

I am also looking for someone with a Leader T2 MkV that is in southern AZ so I can take some side by side pics and show the differences that were made when AAA took over production.

Thanks for the feedback on the new mail system. It seems to have worked other that the fact that I sent out basically a blank message.

I hope the email you get for this one will be much improved.

May 24, 2015

Subscriber Pictures #5

These picture come from Shane and I have to publicly apologize for not getting them posted earlier.

Besides the fact that he has an excellent Costa Mesa gun, he has an awesome case to put it and his accessories in.

If anyone has seen a case like this before and can shed some light on its origins, Shane as well as the rest of us, would like to know.

Please leave comments with any info you might have and if my spam blocker catches yours and you don’t see it post, hit me up on the contact form and I will get it handled.

May 16, 2015

Subscriber Pictures #4

These come from a self professed AR-180 Fanatic, John.

With 14 rifles I would say his diagnosis might be accurate, at the very least, he has a severe case of RBRD.

That’s Retro Black Rifle Disease for those who are unfamiliar with the acronym. A disease that I too, suffer from.

Here is just a sampling of some of his collection from the last time he pulled them out of the safe.

I especially like his early Howa. I hope to have one of those myself someday.

He likes to shoot his ,which is what they were made for, and reports great success with steel case ammo.

He also has a surplus of parts, accessories, and guns for sale so send me a message via the contact form if you are looking for anything and I will put you in contact with him.

Thanks again for all the e-mails and suggestions. Keep them coming and don’t forget to subscribe and comment.