ArmaLite AR-180 Scopes

As I have collected more AR-180 scopes I have been able to note certain features and changes that occurred over the production run.

I first wrote an article about the early scopes or first generation scopes back in 2014. First Generation Scope

Now that I have multiple scopes from each generation I felt I should expand on my earlier article.

Lets look at the group so far.

6B6F3EA8-20EB-4A95-8C5D-9F2DF22D3EB8_zpskfplffon

Here they are shown from left to right in order of production date.

15A1647D-26D0-4B3A-8FC0-75323603C07E_zps9g6c6m73

The three on the right are first generation, inverted post reticle, marked in meters, serial numbers starting in 67.

1EB2F4BC-F8EE-4A3D-AF2D-A960FB76A2F8_zpsvzm0aiyr

Scopes four and five are second generation, inverted post reticle, marked in yards, serial numbers starting in 71.

36CE22F6-C507-4A86-BA36-00CC277163AA_zpspga96eve

The last two are third generation, cross-hair reticle, marked in yards, no serial number.

The first thing that jumped out at me was the ArmaLite and power engravings. They appear to become thicker in the later scopes and the change happened during the second run of scopes. Those made in 1971.

The first second gen scope is numbered 711201 and this scope has markings like the early, first gen scopes. The second scope is numbered 712116 and has markings like the late, third gen scopes. Somewhere between these two scopes the change happened.

If anyone has any scope numbered between these two I would like to know the serial number and style of marking. I think we can pin this down a little closer.

The shape of the downward leg of the 7 is different on the second generation scopes, independent of the thickness of the lettering. Early and late scopes have a curved leg on the 7. Second gen scopes have straight leg.

Sorry, my numismatic past still surfaces from time to time. Next thing you know, I will have my loop out looking for variations.

The markings for the bullet drop compensation knob are also different. Not just the meters vs. yards but the spacing and placement of the markings. The knobs are all on the “1 to 2” position.

Early

3D1A125F-3A5C-4F7D-BF18-A6379E6147FA_zpsacnorvni

Second gen

1C918A46-E195-40AB-A9B6-7058B0595E8A_zpslx3xnmod

Third gen

A0460C0B-6A6F-4BA9-85CF-75DDF755D26D_zps8rcrt7d7

Finally some notes about inspection stickers. I do not have any on my second gen scopes but there are different ones on the first and third gen scopes.

Early sticker is on top front of scope.

8D4D601F-156D-46A5-9A5A-10EF6962DAF0_zpscqm8m9lh

Third gen is on the bottom front

1CCFE7A0-6A95-494D-95D3-F3196E554B3A_zpsy2wwl547

Still looking for the variation that has a “K” sticker on the windage adjuster cover. I’m not sure yet where that one falls into the mix.