AR180 Bolt Carrier Group – Page 11

September 12, 2015

Original ArmaLite Shipping Box and Parts

I recently traded some goodies with one of my readers and ended up with this awesome piece of history.

It would appear that someone ordered some spare parts for their AR-180 and then it just sat around, unused.

I believe it was sold recently on GunBroker as a package with the gun and I was able to do some horse trading for it from him.

This is the stuff that really gets my juices flowing. I almost love the history part of this hobby more than the shooting. Almost.

Shown here with what is left of an AR-180 Scope box.

September 5, 2015

AR-180B Lower Parts Update!

Just got my sample parts from Chuck and I must say, they look awesome. I really like the light park job that he has done on these and the quality is outstanding.

The Bolt hold opens need a bit of a tweak on one bend so that is holding us up a bit. They should be ready to go shortly so get your name on the list by emailing me at rkelley91 at gmail dot com and I will put you on the list.

These parts along with an AR-15 lower parts kit will allow you to populate a Nodak NDS-18S lower without having to buy an AR-180B first.

You can then use that lower on your original AR-180, AR-180B, and Vulcan V-18. Using one on an original 180 will allow you to use standard AR-15 STANAG magazines instead of 180 mags.

Pricing is $125 per set, shipped and insured in the continental US, Alaska and Hawaii slightly higher. No international sales at this time.

Now for some pics of this set in my SBR lower.

August 27, 2015

Leader Dynamics VS. Australian Automatic Arms

Not exactly a competition but since Chuck at GunLab.net was nice enough to loan me his Leader Dynamics T2 MkV rifle, I used that opportunity take some pics and compare it to it’s direct decedent, the Australian Automatic Arms SAP.

August 3, 2015

A Visit to the GunLab – AR-180 Parts

This past Saturday I had the opportunity to visit Chuck at GunLab.net and it was an awesome and overwhelming experience. I wished I had taken the time to take more pictures but I think I was a little in shock at all the cool guns, parts, and equipment. By far the best part of the trip was the company, Chuck and Shirley are two of the nicest folks you could ever have the pleasure of meeting.

We chatted at length about his work on the AR-180 parts he is building. The lower parts that he is making to fit your AR-180B and Nodak NDS-18S lowers were at heat treating and should be back this week. Parkerization and final inspection along with one final operation on the springs will finish this phase. They should be ready to ship very soon.

Next up he is working on uppers. We are hoping to have them available in several configurations from flats to complete uppers with trunnions and rails. He sent me some pictures of his solid model of the stamping die he is building.

Trunnions have also been modeled and those should be coming shortly after the upper sheet metal.

I also gave him one of my original prototype AR-180C railed front sight bases and I am hoping that we can get a few of those made.

The AR-180C flat top might become a reality after all!

Finally yours truly with the only picture from my visit, holding an MP-44 for the very first time. I find it astonishing that they were able to crank these out in the numbers they did, with allied bombs dropping all around them, and that the complexity of manufacture I see in this gun was actually a time saver compared to older weapons.

Make sure to subscribe so you don’t miss any new posts.

July 30, 2015

More AR-180 Upper News

Chuck at GunLab.net has been working on AR-180 uppers and has reverse engineered the trunion and has put up a very interesting article.

AR-180B Trunnion Design

I on the other hand, lacking any semblance of expertise in CAD took a differing approach when I reverse engineered my AR-180B upper.

Good friend of the site, Carl, sent me some square tubing that he has successfully used in his home builds. I decided to duplicate my upper using this material. It is much thicker wall than the original and I will have to shave this down at least on the bottom surface to get it to work with my lowers.

I did this for two main reasons. I wanted to refresh my skills on the mill as it has been many years since I last used one, and secondly, just to see if I could.

I made my first trunion out of 6061 aluminum just to test my measurements out and I have found that a few needed to be adjusted.

I learned a lot from this project and I find things like this much more rewarding than the usual beginners projects.

I will continue to tweak this until I am happy with it then I will start a new one using the first as a template. I think I will make the trunion out of 4140 unless y’all have any advice.

Some pictures that show what I have been up to for the last two days.

Some things to note if you attempt one of these yourself. The interior of the tubing is not perfectly square so some hand fitting will be necessary. The tubing spreads open once the bottom is cut. Some method of squeezing it back before welding would have to be considered. Lastly, all of this will be rendered moot once Chuck makes new uppers and flats available. Until then I will use this as a way to improve my machine skills and better learn my tools.